spacer
emcor header
You Are Here:  Home  » Emission ControlEMI/RFI Shielded Enclosures

EMISSION CONTROL EMI/RFI SHIELDED ENCLOSURES

FCC 1
Emcor's complete line of modular EMI/RFI Level Shielded Enclosures and accessories were engineered with performance in mind. This line is a perfect combination of quality and styling that shields your system effectively and presents it in an attractive package of which you can be proud. Tested to MIL-STD 285 at a certified test facility, this Emcor shielded enclosure line provides attenuation in excess of 100 db in the E-field to 38 db performance at 1 GHz. Please contact Emcor for more information about emission control enclosures.

view pdf Emission Control Catalog (PDF, 6 MB)

 

FCC 2


FCC Emission Control Frame Styles and Standard Sizes
10 vertical Vertical Frames
 2 Panel Widths:  19-1/16" (484.2)
   24-1/16" (611.2)
 2 Depths:  26-5/16" (668.3)
   31-9/16" (801.7)
 10 Vertical
Opening Heights:		  26-3/8" (669.9)
   33-3/8" (847.7)
   35-1/8" (892.2)
   40-3/8" (1025.5)
   49-1/8" (1247.8)
   52-5/ 8" (1336.7)
   61-3/8" (1558.9)
   63-1/8" (1603.4)
   70-1/8" (1781.2)
   78-7/8" (2003.4)
10 series slope front SLOPE FRONT FRAMES
 2 Panel Widths:  19-1/16" (484.2)
   24-1/16" (611.2)
 2 Depths:  26-5/16" (668.3)
   31-9/16" (801.7)
2 Slope
Opening Heights:		  17-9/16" (446.1)
   21-1/16" (535 )

 

FCC Graph

 
Shielding effectiveness was determined using the measurement procedures of Mil. Std. 285. Testing was done at a FCC recognized test facility by a fully computer-automated EMC measuring system.

FCC Level Design and Construction Features
  • Heavy duty construction offers up to 3,500 pounds of evenly distributed static loaded equipment mounting, utilizing a combination of sheet metal and machine screw hardware.
  • Strong design with fully welded 14 gauge steel multi-formed 1-3/4" wide frame channel. All corner joint seams are welded and metal finished for strength and a clean appearance.
  • Frames, doors and all bolt-on components are fully zinc plated for electrical conductivity.
  • Rigid door design provides a positive and consistent seal around the door periphery through the use of a multi-point latching system.
  • A highly conductive, galvanically compatible wire mesh gasket provides electrical conformity for all bolt-on items.
  • All frames are supplied with multi-formed zinc plated panel mounting angles and an applicable hardware kit.
  • All items are finished with a high quality baked-on paint in a textured finish. Gasket points are masked off prior to painting.

FCC Emission Control Assembly Components
To complete your emission control enclosure system, you can choose from a broad selection of accessory items such as surface mounted shielded doors, equipment shelves, closure panels and panel bridges, writing tops, chassis guides, plug-in-strips, bus bars, shielded blowers...and much more.