Emcor Enclosures - Rochester Minnesota

	Home	Company	Market	Products	Resources	Support

You Are Here: » » Technical Drawings » 10 Series Nameplates And Miscellaneous Hardware

10 SERIES NAMEPLATES AND MISCELLANEOUS HARDWARE

Nameplates

Nameplates provide a method of identification for your company or system callout using a quality aluminum extruded framework

anpx-x-000119

Part Number	PDF	Nameplate Height	Nameplate Width
ANPX-XXX-000119		1.75"	19"
ANPX-XXX-000319		3.50"	19"
ANPX-XXX-000124		1.75"	24"
ANPX-XXX-000324		3.50"	24"

Casters/Leveler Kits

caster 3

Part Number	PDF	Where Used	Weight Load Rating Per Caster
HW-450		Mounts directly to the bottom of frame or optional pontoon & forklift bases and XLK-01 leveler kit	350#
HW-450-LK		Mounts directly to the bottom of frame or optional pontoon & forklift bases only	350#
HW-451		All frames with pontoon base	375#
HW-451-LK		All frames with pontoon base	375#
HW-401		All frames with pontoon base	200#
HW-408		All frames with pontoon base	200#
HW-4989		Anti-tip base only	300#
HW-4999		Anti-tip base only	300#
HW-486		All frames with pontoon base	180#

Leveler Kits

leveler 1

leveler 2

Part Number	PDF	Where Used	Weight Load Rating Per Caster
XLK-01		All frames without a pontoon base when both casters and levelers or levelers only are required. Note: HW-450 casters must be ordered separately	800#
UPLK-01		All frames with a pontoon base when both casters and levelers are required. Note: HW-450 casters must be ordered separately	800#
ALDX-XXX-180019		All frames with pontoon base when only leveler function is required	Weight load depends upon application - contact the factory
XLK-02		All frames without pontoon base when only leveler function is required	Weight load depends upon application - contact the factory

Floor Lock

HW-400
For use on anti-tip base only. This floor lock unit is mounted to the bottom of the assembly and secures the enclosure assembly firmly in position when activated. The lock is operated by an easy touch of the foot.

Miscellaneous Hardware

HW-103
#10-32 Thread truss head machine screw, Phillips head, 1.125" long with polyethylene washer. USED FOR: Mounting formed steel closure panels to tapped mounting angles or when using clip nut AHWX-092-003219.

HW-104
#10-32 Thread truss head machine screw, Phillips head, .5" long with polyethylene washer. USED FOR: Mounting .125" thick flat aluminum panels to tapped mounting angles or when using clip nut AHWX-092-003219.

HW-092
#10-32 Thread Captive Clip Nut. USED FOR: 16, 14, and 11-gauge material with HW-103 or HW-104 truss head machine screw when mounting .625" or .125" thick panels.