ESQ Enclosure System Nameplates and Miscellaneous Hardware | Electronic Enclosures

Emcor Enclosures - We See Enclosures Differently

	Home	Company	Market	Products	Resources	Support	emcorsales.com

You Are Here: » » Technical Drawings » ESQ Nameplates & Miscellaneous Hardware

ESQ NAMEPLATES & MISCELLANEOUS HARDWARE

View Cart

Nameplates provide a method of identification for your company or system callout using a quality aluminum extruded framework.

Part Number	View PDF	Add to Cart	Nameplate Height	Nameplate Width
ANPX-XXX-000119			1.75"	19"
ANPX-XXX-000319			3.50"	19"
ANPX-XXX-000124			1.75"	24"
ANPX-XXX-000324			3.50"	24"

Casters/Leveler Kits

Caster 3

Part Number	View PDF	Add to Cart	Where Used	Weight Load Rating Per Caster
HW-484			Counter height and smaller frames with pontoon base	75#
HW-485			Counter height and smaller frames with pontoon base	75#
HW-486			All frames with pontoon base	180#
HW-401			Caster plates and all frames with pontoon base	200#
HW-408			Caster plates and all frames with pontoon base	200#
HW-402			Caster plate only	200#
HW-4989			Caster dollies only	300#
HW-4999			Caster dollies only	300#
HW-450			Mounts to the pontoon base	350#
HW-450-LK			Mounts to the pontoon base	350#

Caster/Leveler Mounting Kits

Leveler 1

Leveler 2

Part Number	View PDF	Add to Cart	Where Used	Weight Load Rating Per Caster
UPLK-01			All frames with a pontoon base when both casters and levelers are required. Note: HW-450 casters must be ordered separately	800#
ALDX-XXX-180019			All frames with pontoon base when only leveler function is required	Weight load depends upon application - contact the factory
XLK-02			All frames without pontoon base when only leveler function is required	Weight load depends upon application - contact the factory
XLK-03			All Flat Panel Display bases frames	Weight load depends upon application - contact the factory

Caster/Leveler Mounting Kit for instrument frames

Mounting Kit for Instrument Frame

MTGKIT-SFRI

Bolt-on mounting kits provide a means to mount HWH-2501 Casters or
HW-405 Levelers to the bottom of ESQ Instrument Frames. (set of four)

HWH-2501

HWH-2501-lk

HW-405

Floor Lock

HW-400

For use on anti-tip base only. This floor lock unit is mounted to the bottom of the assembly and secures the enclosure assembly firmly in position when activated. The lock is operated by an easy touch of the foot.

Miscellaneous Hardware

HW-103 #10-32 Thread truss head machine screw, Phillips head, 1.125" long with polyethylene washer. USED FOR: Mounting formed steel closure panels to tapped mounting angles or when using clip nut AHWX-092-003219.

HW-104
#10-32 Thread truss head machine screw, Phillips head, .5" long with polyethylene washer. USED FOR: Mounting .125" thick flat aluminum panels to tapped mounting angles or when using clip nut AHWX-092-003219.

HW-092 #10-32 Thread Captive Clip Nut. USED FOR: 16, 14, and 11-gauge material with HW-103 or HW-104 truss head machine screw when mounting .625" or .125" thick panels.