All isoNet frames include 2 pr. (4 ea) square hole EIA compliant mounting angles.
These angles mount directly to the frame struts, which provide for infinite front-to-rear adjustability. Optional
.281" (7.1) diameter thru hole or .159" (4) 10-32 NF2 tapped mounting angles are available as listed below.
Square Hole
14 Ga. Steel
Part Number
PDF
Length
DMA-35U-S
61.25 (1555.8)
DMA-40U-S
70.00 (1778.0)
DMA-45U-S
78.75 (2000.3)
DMA-49U-S
85.75 (2178.1)
Round Hole
11 Ga. Steel
Part Number
PDF
Length
DMA-35U-R
61.25 (1555.8)
DMA-40U-R
70.00 (1778.0)
DMA-45U-R
78.75 (2000.3)
DMA-49U-R
85.75 (2178.1)
Tapped Hole
11 Ga. Steel
Part Number
PDF
Length
DMA-35U-T
61.25 (1555.8)
DMA-40U-T
70.00 (1778.0)
DMA-45U-T
78.75 (2000.3)
DMA-49U-T
85.75 (2178.1)
Strap
11 Ga. Steel
Part Number
PDF
Length
DMS-35U
61.25 (1555.8)
DMS-40U
70.00 (1778.0)
DMS-45U
78.75 (2000.3)
DMS-49U
85.75 (2178.1)
Reducer Brackets
IsoNet reducer brackets mount directly to 800mm wide
frame posts to facilitate either 23" or 19" equipment mounting. When 23" or 19" mounting is required,
the appropriate reducer bracket kit must be ordered as a separate item.
