|
||||||||||
|
||||||||||
| You Are Here: Home » Products » Seismic Light Duty | ||||||||||
SEISMIC ENCLOSURE SYSTEMS |
||||||||||
Emcor Qualified Seismic Enclosures
Emcor seismic qualified enclosures are designed specifically to protect your equipment during seismic
events. To be seismically qualified, an enclosure must meet or exceed the Bellcore NEBS Zone 4 testing objectives and
requirements. Emcor has qualified three styles of enclosures to Telcordia GR-63 CORE Physical Protection.
Light Duty Seismic Enclosures
The light duty system utilizes Emcor's standard 10 Series 14 and 16 gauge frame construction and side panels of a modified
16 gauge heavy duty design. Each frame requires two (2) 1/4" thick tie down brackets, one mounted front and one rear. The
qualified assembly consisted of the frame, two (2) side panels, four (4) equipment shelves and a front door. This design
is qualified to handle a load distribution of 400 lbs. with the center of gravity at approximately 30”.
 Light Duty Specifications
2 Panel Widths:
3 Depths:
9 Vertical Opening Heights(Range):
19-1/16”
24-1/16”
26-5/16”
31-9/16”
36-7/8”
26-1/4” to 78-3/4”
Note
Emcor has tested and qualified various single bay cabinet designs to the Telecordia GR-63-CORE,
Zone 4 seismic specification. Modifications made to the tested cabinet configuration, its weight load distribution, the accessories utilized or the integration
of frames into multiple cabinet bays may affect performance. A formal test report, load distribution criteria and engineering
assistance is available by contacting Emcor direct.
 |
||||||||||
|
||||||||||||||||||||||||
