Enclosure Bottom and Base Options
Select the tabs below for options specific to each product line.
ESQ
ESQ Enclosure Bottom and Base Options
The following bottom and base options are available for the ESQ Enclosures product line: Bottom Panel | Riser Base (Pontoon Base) | Anti-Tip/Caster Dolly Base |
Bottom Panels
These panels can be used to close off all -or portions of- the bottom of the frame. Solid and Perforated styles are most popular.
Solid
Vented
Louvered
Perforated
Riser Base (Pontoon Base)
A riser base (aka pontoon base) is available for applications where raising the enclosure above the floor is required. A riser base (pontoon base) is also used when an electrical outlet is needed in the lower outside area of the frame.
Riser Base (Pontoon Base)
Riser Base with Outlet Provisions
Slope Wedge Riser Base
Vertical Wedge Riser Base
Anti-Tip/Caster Dolly Base
This base can be used for anti-tip requirements or as a caster dolly by adding casters. Choose from swivel, rigid, or locking casters – ordered separately.
Anti-Tip Base/Caster Dolly
G-Series
G-Series Enclosure Bottom and Base Options
The following bottom and base options are available for the G-Series Enclosures product line: Bottom Panels | Riser Base (Pontoon Base)
Bottom Panels
Bottom panels are designed to close off the entire opening of the bottom of the frame.
Solid
Peforated
Riser Base (Pontoon Base)
A riser base (aka pontoon base) is available for applications where raising the enclosure above the floor is required. A riser base (pontoon base) is also used when an electrical outlet is needed in the lower outside area of the frame.
Riser Base (Pontoon Base)
10 Series
10 Series Enclosures Bottom and Base Options
The following bottom and base options are available for the 10 Series Enclosures product line: Bottom Panels | Riser Base (Pontoon Base) | Fork Lift Base | Anti-Tip Base.
Bottom Panels
Bottom panels are designed to close off the entire opening of the bottom of the frame.
Solid
Perforated
Riser Base (Pontoon Base)
A riser base (aka pontoon base) is available for applications where raising the enclosure above the floor is required. A riser base (pontoon base) is also used when an electrical outlet is needed in the lower outside area of the frame.
Riser Base (Pontoon Base)
Riser Base with Outlet Provisions
Vertical Wedge Riser Base
Slope Wedge Riser Base
Fork Lift Base
This base is designed for applications where movement of the populated frame by a fork-lift is necessary. The base provides for front, rear, and side access.
Fork Lift Base
Anti-Tip/Caster Dolly Base
This base can be used for anti-tip requirements or as a caster dolly by adding casters. Choose from swivel, rigid, or locking casters – ordered separately.
Anti-tip Base/Caster Dolly